| ADJUSTABLE BED PARTS AND SERVICE |
I am also the repair technician at ADJUSTABLEBEDMART.com. You can order parts through this page or, to see all of our adjustable beds, mattresses and linens, go to
ADJUSTABLEBEDMART.com
* Malka Greene/Alley, Inc, dba Adjustable Bed Mart was a corporation that has been dissolved. We are not affiliated with either company.
|
HOW TO ORDER
CALL ME (760-773-2337) OR E-MAIL ME TO PLACE AN ORDER. WE APOLOGIZE FOR ANY INCONVENIENCE THIS CAUSES YOU BUT BECAUSE THERE ARE NO GENERAL CROSS REFERENCES FOR ALL OF THE MAKES OF BEDS OUT THERE, MY EXPERIENCE HAS SHOWN THAT I NEED TO TALK TO YOU TO MAKE SURE YOU GET THE RIGHT PART.
Once I have figured out the right part for you, there are two ways to order them.
1. Send a check, made out to Jeff Alley, for the total amount due, to:
Jeff Alley.
P.O. Box 13404
Palm Desert, CA 92255.
I will ship the parts the next business day after I receive the check.
2. (FASTEST) I can send you a pay pal request for payment. I send the parts out the next business day after I receive notice from paypal that a payment has been received. YOU DO NOT HAVE TO BE A MEMBER OF PAYPAL TO DO IT THIS WAY AND I NEVER SEE ANY OF YOUR PAYMENT METHOD INFORMATION.
PARTS DEPARTMENT HOURS
9 AM TO 6 PM PACIFIC TIME
MONDAY THRU SATURDAY
760-773-2337
|
SERVICE
In addition to being the warranty center for both Leggett & Platt AND Reverie bases, we can perform non-warranty repairs on almost all brands of adjustable beds.We can even convert most old hard wired hand controls into the new wireless remote hand control.
|
ACCESSORIES AND REPAIR PARTS
We have a large selection of accessories and repair parts for adjustable beds. If we don't have it and it is still being made, we can usually get it for you. Scroll down to see some of the standard accessories and repair parts that we have. Even if you don't see what you need, we will try and get it for you! Return policy.
|
HALF SIDE RAILS
We have half length side rails available for adjustable beds. The advantage of half length side rails is that they help keep you from falling out of bed yet they are out of the way when you want to get out of the bed. Most of our customers use them to hold onto getting out of bed. Two sets can be purchased if you need full length protection. They have a lovely chrome finish. They are easily installed by yourself or we can install them for you if you are in our service area.
ALONE INSTALLED
ONE $ 135.00 $235.00
SET (2 PIECES) $ 250.00 $350.00
|
 |
| Half Side Rail |
|
|
MATTRESS GUARDS
Mattress guards are the bar at the foot of the bed that keep your mattress from sliding off the foot of the bed when you raise the head of the bed. While the older mattress guards were flat black metal, the new ones are round chrome and are stronger that the old flat ones. They are available in two styles - one that bolts to the top of the base platform (usually for a Lifestyle™ or S-Cape™ base) and one that bolts to the bottom of the base platform (most all other beds). They are available in 17 inch and 30 inch widths. The 17 inch model can also be used on the side of the bed to keep light mattresses from sliding around when you get in and out of the bed.
$ 40.00 each
|
 |
| Mattress Retainer Bar |
|
|
 |
| S-CAPE BRACKETS |
|
| HEADBOARD BRACKETS FOR S-CAPE AND MAXWELL BEDS
BRACKETS MADE BY AND FOR LEGGETT AND PLATT S-CAPE BASES AND MAXWELL BASES
$ 60.00
|
 |
| MAXWELL HEADBOARD BRACKETS |
|
|
2-4-6 RISER KIT FOR L & P K-BASE
The 2-4-6 Riser Kit fits the Leggett and Platt K-bases (also know as InComfort™ bases)
They can be manually set to raise your bed 2 inches, 4 inches or 6 inches. Your original wheels push back into the bottom of them to retain your bed's mobility. One set is required for each bed so a dual king bed requires 2 sets. Each kit includes the required mounting hardware.
$ 150.00 per set
|
 |
| 2-4-6 Riser Kit |
|
|
LEGS FOR L & P LIFESTYLE™ BASES
The Leggett & Platt Lifestyle™ bases are equiped with interchangeable legs. They are available in 8 different sizes: 2 inch, 3 inch, 4 inch, 5 inch, 6 inch, 7 inch, 9 inch, 11 inch (NOT RECOMMENDED FOR USE WITH WHEELS) and 5 to 9 inch adjustable legs. The different size legs allow you to use a different thickness of mattresses on each side of a dual king and they allow you to adjust the height of your bed to make it easier to get in and out of the bed. The 5 to 9 inch adjustable legs have glides instead of wheels. The 3 inch legs are also available in chrome. You need one set per bed.
3", 4", 5", 7"LEGS $ 55.00 PER SET
NEW! 2", 6", 9", 11" LEGS $ 55.00 PER SET
5" to 9" ADJUSTABLE LEGS $ 70.00 PER SET
3" CHROME LEGS $ 60.00 PER SET
|
 |
| L & P LIFESTYLE LEGS |
|
|
L & P HAND CONTROLS
We have both hard wired and remote hand controls.
Prices range from $ 65.00 to $ 150.00 depending on the model.
(note: the low voltage cord on the low voltage hand control is sold as a separate item - $20.00.
| |
|
 |
| 110 VOLT HAND CONTROL |
|
|
 |
| GENERIC 110 VOLT HAND CONTROL ASSEMBLY |
|
|
 |
| MOTOR PLUG ON GENERIC 110 VOLT HAND CONTROL |
|
|
GENERIC 110 VOLT HAND CONTROL
I
have generic 110 volt hard wired hand controls that will work with
older beds made before the switch to low voltage wired hand controls.
There is only one supplier left that makes these controls.
Unless
your control and junction box under the bed look like this one, you
will have to either cut the old hand control away from its cord under
the bed as close to the junction box as possible and splice the new one
on or, if it has a plug on the end, cut the plug off and splice it onto
the new hand control. I will send you the wiring codes for the new hand
control when I ship it but you will have to determine the codes for
your old hand control. Unfortunately, nobody ever published wiring
schematics for the old beds. If you are unable to do this, your favorite
electrician should be able to. I can pre-attach new covered spade
plugs on the new hand control for you if you want at no extra charge. If
your old control unplugs, you can send the it (with plug) to me and I
will splice the new hand control onto your old plug.
$ 110.00
|
OUT OF STOCK!
I have to have these special made. Due to the low demand for this part, combined with a large minimum purchase from the manufacturer, it is not feasible for me to carry this item any longer. All that I can recommend is that you take your old belt to a automotive dealer and have them match it up to a fan belt of the same size.
I apologize for the inconvenience.
I hear from Blair, one of my customers, that he went to NAPA auto parts where they were able to match his drive belt up with their name brand of belt. It is an FHP belt #4L250 measuring 1/2" x 25". He states that it is working great on his bed. Thanks for the helpful hint Blair.
| |
WIRELESS REMOTE CONTROL UPGRADE KITS
We can upgrade most hard wired hand control beds to the new remote controls. You have to replace both the hand control and the receiver under the beds.
$370.00 to $ 440.00 DEPENDING ON THE HAND CONTROL DESIRED
| |
MAXI-SAFE™ LIFT MOTOR FOR L & P K-BASE
The Maxi-Safe™ lift motor fits the Leggett and Platt K-bases (also know as InComfort™ bases). They have a built in safety switch that shuts the motor off it the bed encounters an obstruction on the way down. It is connected to the bed by an "Acme Nut" that is designed to break instead of the motor if excess weight is placed on the bed. No other motors have these features! The same motor works for the head or the foot of the bed.
$ 175.00 each
| |
MAXWELL MOTOR CONNECTOR NUT
A "Maxwell Motor Connector Nut" is designed to break instead of the motor if excess weight is placed on the bed. The connector nut at the foot of the bed has a "skirt" attached that causes the foot motor to shut off sooner than the head motor. This skirt rarely breaks and can be switched from the old connector nut to the new one. New beds have the black connector nut pictured here, older beds had a light blue connector nut. They are not interchangeable. We still have a few of the light blue connector nuts left.
Watch a youtube video about the connector nut.
http://www.youtube.com/watch?v=aNHSkVh5kik
$ 20.00 EACH
|
 |
| MAXWELL MOTOR CONNECTOR NUT |
|
|
GENERIC LIFT MOTORS
We carry lift motors for most other brands of bed and the Leggett and Platt beds that don't use the Maxi-Safe motor. If you know what brand your base is, we may be able to get you an exact match, otherwise we have a generic motor that you can use. The plug on the end of the power cord is different for each manufacturer. You may have to splice the plug from the old motor onto the new motor.
$ 175.00
| |
OKI WHISPER MOTORS
Many of the newer beds now use Oki Whisper Motors. Not only are they whisper quiet, they have the option of having a battery backup in case of a power failure.
OKI MOTOR FOR USE WITH A BED WITH HARD WIRED CONTROL
$ 225.00
OKI MOTOR FOR USE WITH A BED WITH REMOTE CONTROL AND BATTERY BACK UP
$ 350.00
| |
MASSAGE MOTORS
There are two main types of massage motors:
1. 110 volt a/c motors
2. 24 volt d/c motors
|
 |
| 110 VOLT MASSAGE MOTOR. CLICK ON PICTURE TO ENLARGE. |
|
| 110 VOLT A/C MOTORS
The 110 volt a/c motors are found mainly on the older beds. They have a thick round cord coming from them with a small square 4 pin connector on the end. You may have to cut the end off of your old massage motor and splice it onto the new one.
$60.00 EACH
|
 |
| 110 VOLT MASSAGE MOTOR CONNECTOR. CLICK ON PICTURE TO ENLARGE. |
|
|
 |
| LOW VOLTAGE MASSAGE MOTOR. CLICK ON PICTURE TO ENLARGE. |
|
| 24 VOLT D/C MOTORS
The 24 volt d/c motors are used mainly on beds with oki motors. They have a thin round cord coming from them with a flat 2 pin micro connector on the end.
$ 60.00 EACH
|
 |
| LOW VOLTAGE MASSAGE MOTOR CONNECTOR. CLICK ON PICTURE TO ENLARGE. |
|
|
REPLACEMENT WHEELS
We carry replacement locking wheels for most beds. We have both the push in wheels and screw in wheels. The screw in wheels are for use on Lifestyle™ bases when the legs are removed. We also carry the push in or screw in glides.
PUSH IN WHEELS $ 9.00 EACH / $ 36.00 SET OF 4
SCREW IN WHEELS $ $ 10.50 EACH / $ 42.00 SET OF 4
PUSH IN GLIDES $ 30.00 SET OF 4 ONLY
SCREW IN GLIDES $ 34.00 SET OF 4 ONLY
| |
RUBBER CASTER CUPS
Adjustable beds stay in place quite well on carpet. On tile or hardwood floors its another story though, even with locking caster. That's because the casters are made of plastic, not rubber. These rubber cups are made just for adjustable beds. They are deep enough that the bed won't roll out of them and they don't slide at all when they have weight on them. The only disadvantage is that they make it hare to pull the beds apart when you are changing the fitted bottom sheets on the dual king sets. There are 4 cups in a set and each bed takes a set.
$35.00 for a set of 4
| |
760-641-1456
9 AM TO 6 PM PACIFIC TIME
MONDAY THRU SATURDAY
|
|
